{"id":6377,"date":"2026-05-30T02:42:05","date_gmt":"2026-05-29T23:42:05","guid":{"rendered":"https:\/\/jrn.isi.gov.ua\/?page_id=6377"},"modified":"2026-06-01T15:52:34","modified_gmt":"2026-06-01T12:52:34","slug":"doi-10-52150-2522-9117-2026-40-012","status":"publish","type":"page","link":"https:\/\/jrn.isi.gov.ua\/?page_id=6377&lang=en","title":{"rendered":"DOI: 10.52150\/2522-9117-2026-40-012"},"content":{"rendered":"\n

T. V. Kimstach<\/strong>1,*<\/sup>, Ph. D. (Tech.), Assoc. Prof., ORCID 0000-0002-8993-201X
S. I. Repyakh<\/strong>1<\/sup>,D. Sc. (Tech.), Professor, ORCID <\/em>0000-0003-0203-4135<\/p>\n\n\n\n

1 <\/sup>Ukrainian State University of Science and Technologies<\/em>
* <\/sup>Corresponding author: t.v.kimstach@ust.edu.ua<\/em><\/p>\n\n\n\n

CORROSION OF BRONZES IN HUMID AIR AND SALT FOG<\/h2>\n\n\n\n

Abstract. <\/strong>Introduction.<\/em> Corrosion is a widespread issue that is particularly critical for metal products. The consequences of corrosion may include social and environmental problems, accidents, and man-made disasters, among others. One of the approaches to addressing this problem is the use of structural bronze for manufacturing cast products, as it is resistant, particularly in natural gaseous environments. Problem.<\/em> A promising bronze in this regard is the new structural non-magnetic bronze BrA7K2O1,5Mts0,3, whose corrosion resistance has not yet been studied. Purpose<\/em>.<\/em> <\/strong>To determine the kinetics and rate of unrelated corrosion in humid air and salt fog at 40\u202f\u00b0C for bronzes of grades BrA10Zh4N4, BrA9Zh3L, BrO6Ts6S3, as well as BrA7K2O1,5Mts0,3 bronze before and after heat treatment. Materials and Methods.<\/em> <\/strong>The study used cast samples of \u00d840\u00d710 mm made of BrA10Zh4N4, BrA9Zh3L, BrO6Ts6S3 bronzes, as well as BrA7K2O1,5Mts0,3 bronze before and after heat treatment. Corrosion kinetics were determined by measuring the change in sample mass over a period of 28 days. The mass of the samples was measured using analytical scales. The corrosion rate was calculated taking into account the density of the bronze in the samples, which was determined based on the results of hydrostatic weighing in water. Results.<\/em> In humid air at 40\u202f\u00b0C (according to accepted research methodology), all the bronzes used in this study are completely resistant. In salt fog at 40\u202f\u00b0C, among the investigated bronzes, according to the ten-point corrosion resistance rating scale, BrA10Zh4N4 bronze has a resistance rating of 1, BrA7K2O1,5Mts0,3 bronze has a rating of 1\u20132, BrO6Ts6S3 bronze has a rating of 4, and BrA9Zh3L bronze has a rating of 5. A characteristic feature of the corrosion kinetics of all bronzes in humid air, as well as some bronzes in salt fog (except for BrA9Zh3L and BrO6Ts6S3), is the passivation of their surface after a certain period of exposure under the established conditions and environments in the study. Conclusions.<\/em> <\/strong>The obtained data make it possible to assess the potential and feasibility of using cast products made of corrosion-resistant non-magnetic bronze BrA7K2O1,5Mts0,3 as a substitute for aluminum-based magnetic and non-magnetic tin-based bronzes. The use of cast parts made from this bronze will expand technical and operational capabilities, improve the reliability and durability of existing or newly developed equipment, devices, and other applications.<\/p>\n\n\n\n

Key<\/strong> <\/strong>words:<\/strong> bronze, humid air, salt fog, corrosion, kinetics, corrosion rate, cast products.<\/p>\n\n\n\n

For citation:<\/strong> Kimstach, T. V., & Repyakh, S. I. (2026). Corrosion of bronzes in humid air and salt fog.Fundamental and applied problems of ferrous metallurgy<\/em>, 40, 195-212. https:\/\/doi.org\/10.52150\/2522-9117-2026-40-012<\/a><\/p>\n\n\n\n

References<\/strong><\/strong><\/p>\n\n\n\n

    \n
  1. The Global Cost and Impact of Corrosion. Asset Integrity Intelligence | Inspectioneering<\/em>. URL: https:\/\/inspectioneering.com\/news\/2016-03-08\/5202\/nace-study-estimates-global-cost-of-corrosion-at-25-trillion-ann<\/a><\/li>\n\n\n\n
  2. Disadvantages of Corrosion: Economic, Structural, and More. CORCON Institute of Corrosion<\/em>. URL: https:\/\/corrosionindia.org\/disadvantages-of-corrosion-economic-structural\/?utm_source=chatgpt.com<\/a><\/li>\n\n\n\n
  3. Russo, S., Sharp, P. K., Dhamari, R., Mills, T. B., Hinton, B. R. W., Clark, G., & Shankar, K. (2009). The influence of the environment and corrosion on the structural integrity of aircraft materials. Fatigue & Fracture of Engineering Materials & Structures<\/em>, 32<\/em>(6), 464\u2013472. https:\/\/doi.org\/10.1111\/j.1460-2695.2009.01348.x<\/a><\/li>\n\n\n\n
  4. Joseph, O. O., Banjo, S., Afolalu, S. A., & Babaremu, K. O. (2022). Global and economic effects of corrosion – An overview. Technologies and materials for renewable energy, environment and sustainability: TMREES21Gr<\/em>. AIP Publishing. https:\/\/doi.org\/10.1063\/5.0092286<\/a><\/li>\n\n\n\n
  5. Ilie, M. C., Maior, I., Raducanu, C. E., Deleanu, I. M., Dobre, T., & Parvulescu, O. C. (2023). Experimental Investigation and Modeling of Film Flow Corrosion. Metals<\/em>, 13<\/em>(8), 1425. https:\/\/doi.org\/10.3390\/met13081425<\/a><\/li>\n\n\n\n
  6. Ibrahimi B. E., Nardeli J., Guo L. (2021) An Overview of Corrosion. Sustainable Corrosion Inhibitors I: Fundamentals, Methodologies, and Industrial Applications<\/em>. 1403<\/em>, 1 \u2013 19. URL: https:\/\/www.researchgate.net\/publication\/356295146_An_Overview_of_Corrosion<\/a><\/li>\n\n\n\n
  7. Cai, Y., Xu, Y., Zhao, Y., & Ma, X. (2020). Atmospheric corrosion prediction: a review. Corrosion Reviews<\/em>, 38<\/em>(4), 299\u2013321. https:\/\/doi.org\/10.1515\/corrrev-2019-0100<\/a><\/li>\n\n\n\n
  8. Chen, X., Zhang, Z., Zhang, H., Yan, H., Liu, F., & Tu, S. (2022). Influence of Air Pollution Factors on Corrosion of Metal Equipment in Transmission and Transformation Power Stations. Atmosphere<\/em>, 13<\/em>(7), 1041. https:\/\/doi.org\/10.3390\/atmos13071041<\/a><\/li>\n\n\n\n
  9. Francis, R. (2002). Humidity and Dew Point: Their Effect on Corrosion and Coatings<\/em>. Academia.edu \u2013 Find Research Papers, Topics Researchers. https:\/\/www.academia.edu\/17021842\/Humidity_and_Dew_Point_Their_Effect_on_Corrosion_and_Coatings.<\/a><\/li>\n\n\n\n
  10. Picciochi, R., Ramos, A. C., Mendon\u00e7a, M. H., & Fonseca, I. T. E. (2004). Influence of the Environment on the Atmospheric Corrosion of Bronze. Journal of Applied Electrochemistry<\/em>, 34<\/em>(10), 989 \u2013 995. https:\/\/doi.org\/10.1023\/b:jach.0000042667.84920.e2<\/a><\/li>\n\n\n\n
  11. Chang, T., Herting, G., Goidanich, S., S\u00e1nchez Amaya, J. M., Arenas, M. A., Le Bozec, N., Jin, Y., Leygraf, C., & Odnevall Wallinder, I. (2019). The role of Sn on the long-term atmospheric corrosion of binary Cu- Sn bronze alloys in architecture. Corrosion Science<\/em>, 149<\/em>, 54 \u2013 67. https:\/\/doi.org\/10.1016\/j.corsci.2019.01.002<\/a><\/li>\n\n\n\n
  12. Kimstach, T. V., Uzlov, K. \u0406., Repiakh, S. I., & Solonenko, L. I. (2021). Analysis of different environments influence on copper alloys corrosion resistance. Physical Metallurgy and Heat Treatment of Metals<\/em>, (3), 36\u201345. https:\/\/doi.org\/10.30838\/j.pmhtm.2413.010721.36.780<\/a><\/li>\n\n\n\n
  13. Kimstach, T. V., Uzlov, K. I., Usenko, R. V., & Solonenko, L. I. (2021). Corrosion resistance of bronze products. Quality strategy in industry and education: materials. XVI International Conference<\/em>, (June 2\u20135, 2021, Varna, Bulgaria). Varna: TU\u2013Varna, 2021. pp. 78\u201383. URL: https:\/\/nmetau.edu.ua\/file\/–sbornik-varna-2021-full.pdf<\/a><\/li>\n\n\n\n
  14. Sch\u00fcssler, A., & Exner, H. E. (1993). The corrosion of nickel-aluminium bronzes in seawater \u2013 II. The corrosion mechanism in the presence of sulphide pollution. Corrosion Science<\/em>, 34<\/em>(11), 1803\u20131815. https:\/\/doi.org\/10.1016\/0010-938x(93)90018-c<\/a><\/li>\n\n\n\n
  15. Wharton, J. A., & Stokes, K. R. (2008). The influence of nickel-aluminium bronze microstructure and crevice solution on the initiation of crevice corrosion. Electrochimica Acta<\/em>, 53<\/em>(5), 2463 \u2013 2473. https:\/\/doi.org\/10.1016\/j.electacta.2007.10.047<\/a><\/li>\n\n\n\n
  16. Kear, G., Barker, B. D., Stokes, K., & Walsh, F. C. (2004). Flow influenced electrochemical corrosion of nickel aluminium bronze. Part I. Cathodic polarisation. Journal of Applied Electrochemistry<\/em>, 34<\/em>(12), 1235\u20131240. https:\/\/doi.org\/10.1007\/s10800-004-1758-1<\/a><\/li>\n\n\n\n
  17. Wharton, J. A., Barik, R. C., Kear, G., Wood, R. J. K., Stokes, K. R., & Walsh, F. C. (2005). The corrosion of nickel\u2013aluminium bronze in seawater. Corrosion Science<\/em>, 47<\/em>(12), 3336\u2013 3367. https:\/\/doi.org\/10.1016\/j.corsci.2005.05.053<\/a><\/li>\n\n\n\n
  18. Kear, G., Barker, B. D., & Walsh, F. C. (2004). Electrochemical corrosion of unalloyed copper in chloride media \u2013 a critical review. Corrosion Science<\/em>, 46<\/em>(1), 109\u2013135. https:\/\/doi.org\/10.1016\/s0010-938x(02)00257-3<\/a><\/li>\n\n\n\n
  19. Ferrara R. J., Caton T. E. (1982). Review of dealloying of cast aluminum bronze and nickel-aluminum bronze alloys in sea water service. Materials Performance<\/em>. 21<\/em>(2), 30\u201334<\/li>\n\n\n\n
  20. Chen, Y., Qi, D. M., Wang, H. P., Xu, Z., Yi, C. X., & Zhang, Z. (2015). Corrosion Behavior of Aluminum Bronze under Thin Electrolyte Layers Containing Artificial Seawater. International Journal of Electrochemical Science<\/em>, 10<\/em>(11), 9056\u20139072. https:\/\/doi.org\/10.1016\/s1452-3981(23)11160-6<\/a><\/li>\n\n\n\n
  21. Shanghai Jiao Tong University Press. (2018b). Materials Corrosion and Protection<\/em> (ed. by Y. Huang & J. Zhang). De Gruyter. https:\/\/doi.org\/10.1515\/9783110310054<\/a><\/li>\n\n\n\n
  22. Salvadori, B., Cagnini, A., Galeotti, M., Porcinai, S., Goidanich, S., Vicenzo, A., Celi, C., Frediani, P., Rosi, L., Frediani, M., Giuntoli, G., Brambilla, L., Beltrami, R., & Trasatti, S. (2017). Traditional and innovative protective coatings for outdoor bronze: Application and performance comparison. Journal of Applied Polymer Science<\/em>, 135<\/em>(12), 46011. https:\/\/doi.org\/10.1002\/app.46011<\/a><\/li>\n\n\n\n
  23. Wu, W., Zhang, X., Chen, Y., Ji, J., Zhang, F., Guo, J., Zhao, T., Zhu, J., & Luo, H. (2024). Multifunctional organic-inorganic hybrid coating for enhanced bronze corrosion protection. Journal of Cultural Heritage<\/em>, 69<\/em>, 113\u2013125. https:\/\/doi.org\/10.1016\/j.culher.2024.08.003<\/a><\/li>\n\n\n\n
  24. Kumar, V., & Dwivedi, S. K. (2021). Toxicity potential of electroplating wastewater and its bioremediation approaches: a review. Environmental Technology Reviews<\/em>, 10<\/em>(1), 238\u2013254. https:\/\/doi.org\/10.1080\/21622515.2021.1983030<\/a><\/li>\n\n\n\n
  25. Kimstach, T. V., & Uzlov, K. I. (2025). Chemical composition influence on mechanical properties of Cu-Al-Si-Sn-Mn system bronze during its solidification in die mold. System technologies<\/em>, 2<\/em>(157), 135\u2013145. https:\/\/doi.org\/10.34185\/1562-9945-2-157-2025-14<\/a><\/li>\n<\/ol>\n\n\n\n

    \u0420\u0443\u043a\u043e\u043f\u0438\u0441 \u043d\u0430\u0434\u0456\u0439\u0448\u043e\u0432 \u0434\u043e \u0440\u0435\u0434\u0430\u043a\u0446\u0456\u0457 \/ Received 13.03.2026<\/em>
    \u0420\u0435\u043a\u043e\u043c\u0435\u043d\u0434\u043e\u0432\u0430\u043d\u043e \u0434\u043e \u0434\u0440\u0443\u043a\u0443 \/ Accepted 28.05.2026<\/em>
    \u041e\u043f\u0443\u0431\u043b\u0456\u043a\u043e\u0432\u0430\u043d\u043e \/ Published 30.05.2026<\/em><\/p>\n\n\n\n

    \"\"<\/a><\/figure>\n","protected":false},"excerpt":{"rendered":"

    T. V. Kimstach1,*, Ph. D. (Tech.), Assoc. Prof., ORCID 0000-0002-8993-201XS. I. Repyakh1,D. Sc. (Tech.), Professor, ORCID 0000-0003-0203-4135 1 Ukrainian State University of Science and Technologies* Corresponding author: t.v.kimstach@ust.edu.ua CORROSION OF BRONZES IN HUMID AIR AND SALT FOG Abstract. Introduction. Corrosion is a widespread issue that is particularly critical for metal products. The consequences of corrosion may include […]<\/p>\n","protected":false},"author":4,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-6377","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/pages\/6377","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=6377"}],"version-history":[{"count":2,"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/pages\/6377\/revisions"}],"predecessor-version":[{"id":6959,"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/pages\/6377\/revisions\/6959"}],"wp:attachment":[{"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=6377"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}