{"id":1702,"date":"2020-12-15T11:23:43","date_gmt":"2020-12-15T09:23:43","guid":{"rendered":"https:\/\/jrn.isi.gov.ua\/?page_id=1702"},"modified":"2023-08-12T21:32:58","modified_gmt":"2023-08-12T18:32:58","slug":"1702-2","status":"publish","type":"page","link":"https:\/\/jrn.isi.gov.ua\/?page_id=1702&lang=en","title":{"rendered":"DOI: 10.52150\/2522-9117-2019-33-156-172"},"content":{"rendered":"

\"\"<\/a><\/strong><\/p>\n

Razdobreev Valery Guriyovych,<\/strong> PhD (Engin.), Senior Researcher, Institute named after Z.I. Nekrasov of the NAS of Ukraine, Academican Starodubova square, 1, Dnipro, Ukraine, 49107; e-mail: v_razdobreev@mail.ru
\nPalamar Dmitry Grigorovich,<\/strong> Junior Researcher (Engin.), Iron and Steel Institute named after Z.I. Nekrasov of the NAS of Ukraine, Academican Starodubova square, 1, Dnipro, Ukraine, 49107; e-mail: v_razdobreev@mail.ru<\/p>\n

Investigation of the influence of hot asymmetric long products on the <\/strong>formation of the microstructure, mechanical properties and service <\/strong>characteristics of finished products<\/strong><\/h2>\n

Summary.<\/strong> The aim of the work is to study the influence of the process of hot asymmetric rolling on the structural state, mechanical properties and operational characteristics of long products of simple form from ordinary carbon steel. To simulate the process of asymmetric high-quality rolling, the mathematical model previously developed in the ISI added the possibility of taking into account cases of rolling in a pair of rolls of different diameters, rolling in a pair of rolls of different materials, rolling with one drive and one non-drive rolls, rolling at different speeds in a pair of rolls and other. The calculations showed a reduction in rolling force to 10 % with an asymmetric rolling process compared to the traditional rolling process. The study of the features of the process of hot asymmetric rolling (shear rolling) compared with the traditional rolling process was carried out under industrial conditions in the production of a 12×12 mm square profile from ordinary low-carbon steel St3sp. It was found that the average values of HRB, \u03c3\u0412, and \u03c3\u0422 in the studied samples practically do not differ, and the average values of \u03b45 are higher by 8 % (abs.) or ~ 27 % (rel.) In samples that were rolled using the asymmetric rolling technology than in samples that were rolled using traditional rolling technology. The estimation of dislocation density by the X-ray diffraction method showed that during hot asymmetric rolling, the dislocation density is reduced by ~ 46% due to the active flow of in-situ polygonization and recrystallization processes during deformation. In this case, the average values of the microfractures of the crystalline lattice of ferrite are 21% lower in the samples obtained by the method of asymmetric rolling than in the samples obtained by traditional rolling. For the first time, a decrease in the total atmospheric corrosion rate was found in samples that were rolled using asymmetric rolling technology (0.39 g\/m2xh) compared to samples that were rolled using traditional rolling technology (0.445 g\/m2xh).
\nKeywords:<\/strong> asymmetric hot rolling, traditional rolling, microhardness, hardness, mechanical properties, atmospheric corrosion rate.<\/p>\n

References<\/strong>
\n1. Grudev A.P. Teoriya prokatki: Uchebnik dlya vuzov. – M.: Metallurgiya, 1988. \u2013 240 s.
\n2. Vasil’yev M.A., Prokopenko G.I., Filatova V.S. Nanokristallizatsiya metallicheskikh poverkhnostey metodami intensivnoy plasticheskoy deformatsii. Uspekhi fiz. met. \u2013 2004. \u2013 T.5. \u2013 \u21163. \u2013 S. 345-399.
\n3. Lyakishev N.P., Alymov M.I. Polucheniye i fiziko-mekhanicheskiye svoystva ob”yemnykh nanokristallicheskikh materialov. – M.: Izd-tvo ELIZ, 2007. \u2013 148 s.
\n4. Valiyev R.Z., Aleksandrov I.V. Nanostrukturnyye materialy, poluchennyye intensivnoy plasticheskoy deformatsiyey – M.: Logos, 2000. \u2013 272 s.
\n5. Lesyuk Ye.A. Tekhnologiya polucheniya nanokristallicheskoy struktury v poverkhnostnykh sloyakh massivnykh detaley iz konstruktsionnykh i instrumental’nykh staley. Tekhnologiya metallov. \u2013 2008. \u2013 \u21167. \u2013 S. 29-35.
\n6. Zabelin S.F. Tekhnologii poverkhnostnoy nanokristallizatsii metallov i splavov. [S.F. Zabelin, A.A. Vasil’yev, A.A. Dorozhkov, A.A. Feofanov ]. Uchenyye zapiski ZabGGPU. \u2013 2015. \u2013 \u21162. \u2013 S. 36-44.
\n7. Nikitenko O.A. Formirovaniye ul’tramelkozernistoy struktury uglerodistoy stali v protsesse goryachey plasticheskoy deformatsii. [O.A. Nikitenko, Yu.Yu. Yefimova, M.S. Zherebtsov, Ye.S. Selivanova]. Innovatsionnyye tekhnologii v mashinostroyenii i materialovedenii: sb. tezisov 2-oy nauchno-prakticheskoy konferentsii s mezhdunarodnym uchastiyem, Perm’, 29 sen.-3 okt., 2014. \u2013 S. 96-100.
\n8. Kawalek Anna, Henrik Dyja Analiz izmeneniy sil i momentov nesimmetrichnoy ploskoy prokatki. Vestnik MGTU. \u2013 2013. \u2013 \u2116 5. \u2013 S.28- 33.
\n9. Nayzabekov A.B. O realizatsii intensivnykh plasticheskikh deformatsiy pri prokatke v kalibrakh. [A.B. Nayzabekov, B.B. Bykhin, K.A. Nogayev, M.B. Bykhin]. Sci. and world. \u2013 2014. \u2013 \u211610. \u2013 Ch. 1. \u2013 S. 45-49.
\n10. Mekhtiev A.D. Vliyaniye nesimmetrichnoy prokatki v konicheskikh valkakh na mikrostrukturu nizkouglerodistoy stali. [A.D. Mekhtiev, E.M. Azbanbaev, A.Z. Sagulov et al.]. Metalurgija (Zagreb). \u2013 2015. \u2013
\nVol. 54. \u2013 \u21164. \u2013 S. 623-626.
\n11. Pat. 25313337. Rossiyskaya Federatsiya, MPK V21V 1.00 (2006.01). Sposob asimmetrichnoy prokatki metalla. [A.M. Pesin, A.P. Tkachenko, D.O. Pustovoytov, N.M. Lokotunina, M.A. Biryukov, N.A. Gorkin], zayavitel’ i patentoobladatel’ ChermetInformSistemy. \u2013 \u21162013111708\/02; zayavl. 15.03.2013; opubl. 20.10.2014.
\n12. Pat. 2518028. Rossiyskaya Federatsiya, MPK V21V 13\/10 (2006.01). Rabochaya klet’ stana dlya prokatki profiley v kalibre. [A.M. Pesin, A.P. Tkachenko, D.O. Pustovoytov, N.M. Lokotunina, M.A. Biryukov, V.V. Kurban], zayavitel’ i patentoobladatel’ ChermetInformSistemy. \u2013 \u21162013104893\/02; zayavl. 05.02.2013; opubl. 10.06.2014.
\n13. Pat. 2518358. Rossiyskaya Federatsiya, MPK V21V 13\/10 (2006.01). Rabochaya klet’ stana dlya prokatki profiley v kalibre. [A.M. Pesin, A.P. Tkachenko, D.O. Pustovoytov, N.M. Lokotunina, M.A. Biryukov, V.V. Kurban], zayavitel’ i patentoobladatel’ ChermetInformSistemy. \u2013 \u21162013104846\/02; zayavl. 05.02.2013; opubl. 10.06.2014.
\n14. Liu Gang. Nanokristallizatsiya poverkhnosti kremnistoy stali v zavisimosti ot parametrov nesimmetrichnoy prokatki. [Liu Gang, Ma Ye, Zhang Ruijun, Wang Xiaolan et al.] Acta met. sin. \u2013 2014. \u2013 Vol. 50. \u2013 \u21169. \u2013 PP. 1071-1077.
\n15. Sklyar V.O. Innovatsionnyye i resursosberegayushchiye tekhnologii v metallurgii. Uchebnoye posobiye. – Donetsk: DonNTU, 2014. \u2013 224 s.
\n16. Pokrytiya metallicheskiye i nemetallicheskiye. Metody uskorennykh korrozionnykh ispytaniy: GOST 9.308-85. – M.: Izd-tvo standartov, 1986. \u2013 20 s.
\n17. Yedinaya sistema zashchity ot korrozii i stareniya. Metally, splavy, pokrytiya metallicheskiye. Metody udaleniya produktov korrozii posle korrozionnykh ispytaniy: GOST 9.907-2007 (ISO 8407:1991). -M.:
\nSTANDARTINFORM, 2008. \u2013 19 s.
\n18. Zhuchkov S.M., Lokhmatov A.P., Kulakov L.V.. Optimizatsiya raskhoda energii pri nepreryvnoy sortovoy prokatke. – K.: Naukova dumka, 2008. \u2013 191 s.
\n19. Zhuchkov S.M., Kulakov L.V., Lokhmatov A.P. Upravleniye temperaturnym rezhimom nepreryvnoy sortovoy prokatki (Teoreticheskiye i tekhnologicheskiye osnovy). – M.: Teplotekhnik, 2008. \u2013 144 s.
\n20. Pashinskaya Ye.G., Zavdoveyev A.V. Primeneniye prokatki so sdvigom i traditsionnogo volocheniya dlya formirovaniya struktury i svoystv malouglerodistykh staley. Fizika i tekhnika vysokikh davleniy. \u2013 2012. \u2013
\nT.22. \u2013 \u21163. \u2013 S. 1-12.
\n21. Palamar D.H. Rozrobka sproshchenoho metodu otsinky deformatsiynoho opratsyuvannya tsentral\u02b9nykh zon pererizu rozkatu z bezperervnolytoyi zahotovky pry prokattsi u kalibrakh. [D.H. Palamar, S.O. Vorobey,
\nS.V. Yershov, V.H. Razdobryeyev, I.Yu. Prykhod\u02b9ko]. Zb. naukovykh prats\u02b9 Dniprovs\u02b9koho Derzhavnoho Tekhnichnoho Universytetu. Kam\u02bcyans\u02b9ke: DDTU, 2018. \u2013 S. 74-83.
\n22. Gridnev V.N., Gavrilyuk V.G., Meshkov Yu.Ya. Prochnost’ i plastichnost’ kholodnodeformirovannoy stali. – K.: Naukova dumka, 1974. \u2013 232 s.
\n23. Kaybyshev O.A., Utyashev F.Z. Sverkhplastichnost’, izmel’cheniye mikrostruktury i obrabotka trudnodeformiruyemykh splavov. – M.: Nauka, 2002. \u2013 438 s.
\n24. Trefilov V.I., Moiseyev V.F., Pechkovskiy E.P. i dr. Deformatsionnoye uprochneniye i razrusheniye polikristallicheskikh materialov – K.: Naukova Dumka, 1989. \u2013 256 s.
\n25. Kaybyshev O.A. Nauchnyye osnovy, dostizheniya i perspektivy sverkhplasticheskoy deformatsii. – Ufa: Gilem, 2000. \u2013 150 s.
\n26. Dobatkin S.V., Kaputkina L.M. Karty strukturnykh sostoyaniy dlya optimizatsii rezhimov goryachey deformatsii staley. – Fizika metallov i metallovedeniye. \u2013 2001. \u2013 T. 91. \u2013 \u2116 1. \u2013 S. 79-89.
\n27. Kostina M.V., Dymov A.V., Blinov V.M. Vliyaniye plasticheskoy deformatsii na strukturu i svoystva vysokoazotistykh splavov sistemy FeCr. Metallovedeniye i termicheskaya obrabotka metallov. \u2013 2002. \u2013 \u21161.- S. 1-7.
\n28. Ahmonri A., Torizuka S., Nagai K. Evolution of ultrafine-grained ferrite structure through multi-pass warm caliber rolling. Jornal of the Iron and Steel Institute of Japan. \u2013 2003. \u2013 Vol. 89. \u2013 \u2116 7 \u2013 P. 781-788.<\/p>\n","protected":false},"excerpt":{"rendered":"

Razdobreev Valery Guriyovych, PhD (Engin.), Senior Researcher, Institute named after Z.I. Nekrasov of the NAS of Ukraine, Academican Starodubova square, 1, Dnipro, Ukraine, 49107; e-mail: v_razdobreev@mail.ru Palamar Dmitry Grigorovich, Junior Researcher (Engin.), Iron and Steel Institute named after Z.I. Nekrasov of the NAS of Ukraine, Academican Starodubova square, 1, Dnipro, Ukraine, 49107; e-mail: v_razdobreev@mail.ru Investigation […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-1702","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/pages\/1702","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1702"}],"version-history":[{"count":4,"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/pages\/1702\/revisions"}],"predecessor-version":[{"id":3921,"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=\/wp\/v2\/pages\/1702\/revisions\/3921"}],"wp:attachment":[{"href":"https:\/\/jrn.isi.gov.ua\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1702"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}