DOI: 10.52150/2522-9117-2018-32-371-383
Bobyr Sergey Vladimirovich, Dr. Sci. (Engin.), Leading Research Scientist, Iron and Steel Institute named after Z.I. Nekrasov of the NAS of Ukraine, Academican Starodubova square, 1, Dnipro, Ukraine, 49107; e-mail: svbobyr07@gmail.com, ORCID 0000-0001-6816-1554
Analytical models of austenite transformation in steel with allowance for internal stresses Iron and Steel Institute named after Z.I. Nekrasov of the NAS of Ukraine
Abstract. The aim of the work is to review the analytical models of austenite decay, taking into account the internal stresses obtained by various authors. It is shown that a common drawback of the known works is the neglect of the effect of the stress-strain state arising during the heat treatment of parts on the kinetics of structural transformations, while the available experimental data indicate a significant effect of stresses and strains on structural transformations. It has been established that the experimental data accumulated
to date do not allow reliably describing the effect of the stress state on structural transitions during the heat treatment of steels for the hot deformation tool. A simple theoretical expression is proposed for calculating the amount of martensite formed as a function of the voltage in the γ phase. It is theoretically shown that taking into account the voltage acting in the γ phase leads to an increase in the temperature of the end of the formation of martensite. Experimental study of this effect is especially convenient to carry out in isothermal conditions under uniaxial tension. It is shown that in order to reliably predict the structural state of the hot deformation tool during heat treatment, it is necessary to conduct a comprehensive study related to the experimental study of the effect of stresses on all types of transformations and the creation of an adequate mathematical model of austenite decomposition based on the obtained experimental data.
Keywords: steel, heat treatment, structural transformations, stresses and strains, martensite
Reference
1. Fizicheskoye metallovedeniye: Per. s angl. T.2. Fazovyye prevrashcheniya. [Pod red. R. Kana i P. Khaazena]. – M.: Metallurgiya, 1987. – 492s.
2. Kurdyumov G.V., Utevskiy L.M., Entin R.I. Prevrashcheniya v zheleze i stali – M.: Nauka: 1977, – 238s.
3. Kolmogorov A.N. Izvestiya AN SSSR, seriya matematicheskaya, 1937, №3, s. 355.
4. Avrami M. Kinetics of phase change. I. General theory [J]. Journal of Chemical Physics, 1939, 7(12) P.1103-1112.
5. Lyubov B.YA.. Kineticheskaya teoriya fazovykh prevrashcheniy. – M.: Metallurgiya,1969. – 264s.
6. Kristian Dzh. Teoriya prevrashcheniy v metallakh i splavakh. CH.1. Termodinamika i obshchaya kinetika. – M.: Mir, 1978. – 808s.
7. Mirkin I.L. Issledovaniye evtektoidnoy kristallizatsii stali // Struktura i svoystva staley i splavov: sb. tr. Mosk. in-ta stali – M.: Oborongiz, 1941. – S.5-158.
8. Bol’shakov V.I., Bobyr’ S.V. Kineticheskiye parametry obrazovaniya perlita v zhelezouglerodistykh splavakh. MiTOM, 2004,-№8. – S.11-15.
9. Bobyr’ S.V., Bol’shakov V.I. Modeli i kharakteristiki preryvistogo prevrashcheniya austenita v zhelezouglerodistykh splavakh. Uspekhi fiziki metallov, 2014, T.15, S.123-150.
10. Bobyr’ S.V., Bol’shakov V.I. Analiz statsionarnogo evtektoidnogo prevrashcheniya v uglerodistoy stali na osnove polozheniy neravnovesnoy termodinamiki. Metallofizika i noveyshiye tekhnologii, 2016, t. 38, № 7,
S.983-995.
11. Yudin YU.V., Farber V.M. Osobennosti kinetiki raspada pereokhlazhdennogo austenita legirovannykh staley v perlitnoy oblasti. MiTOM, 2001. – №2. – S.3-8.
12. Khan S.A., Bhadeshia H.K.D.H. The bainite transformation in chemically heterogeneous 300M high-strenght steel. Met. Trans., 1990., Vol. 21a, P. 859-875.
13. Sun N.X., Liu X.D., Lu K. An explanation to the anomalous Avrami exponent. Scrip. Matr. 1996., Vol. 34, №38., P.1201-1207.
14. Bhadeshia H.K.D.H. Some phase transformation in steel. Mater. Sci. and Technol., 1999, Vol. 15, P. 22-29.
15. Vlasova N. V., Adamova N.A., Sorokin V.G. Napryazhennodeformirovannoye sostoyaniye stal’nykh detaley pri reguliruyemom okhlazhdenii. MiTOM, 1986., №12, S. 37-41.
16. Bannova M.I. Parametry rosta a-fazy i svyaz’ s ustoychivost’yu austenita v promezhutochnoy oblasti. Fizika metallov i metallovedeniye, 1975, T.40, Vyp. 6, S. 1319-1320.
17. Ob inkubatsionnom periode perlitnogo prevrashcheniya. [L.A.Alekseyev, R.B.Levi, L.I.Kogan i dr.] Fizika metallov i metallovedeniye, 1979, T.47, Vyp. 5., S.1005-1009.
18. O protsessakh, protekayushchikh v pereokhlazhdennom austenite pered perlitnym prevrashcheniyem. [A.V.Kulemin, S.Z.Nekrasova, R.I.Entin, V.A.Meshalkin]. Izv. AN Metally. 1982, №3, S.68-80.
19. Zin Cher K., Martinovich I.I., Faldin A.A. Vliyaniye napryazheniy i deformatsiy na beynitnoye prevrashcheniye v stalyakh. Novyye konstruktsionnyye stali i metody ikh uprochneniya: Materialy seminara. – M.: MDNTP, 1984. – S.41-45.
20. Zaymovskiy V.A., Faldin A.A. Effekt zapominaniya formy i strukturnaya nasledstvennost’ v stali 40KHN3M. Fizika metallov i metallovedeniye, 1984. – T.58. – Vyp.1. – S.106-112.
21. O prichinakh uskoreniya beynitnogo prevrashcheniya pri nizkotemperaturnoy deformatsii austenite. [V.A.Zaymovskiy, V.A.Martinovich, O.V.Samedov, A.A.Faldin]. Fizika metallov i metallovedeniye, 1986. – T.61. – Vyp.4. – S.760-768.
22. Deformirovaniye metallov v usloviyakh proyavleniya plastichnosti prevrashcheniya. [I.N.Andronov, S.L.Kuz’min, V.A.Likhachev i dr.]. Problemy prochnosti, 1983. – №5. – S.96-100.
23. Abramov V.V. Napryazheniya i deformatsii pri termicheskoy obrabotke stali. – K.: Vishcha shkola, 1985. – 133s.
24. Morozov N.P. Proizvodstvo i ekspluatatsiya krupnykh opornykh valkov. [N.P.Morozov, V.A.Nikolayev, V.P.Polukhin, A.M.Legun]. – M.: Metallurgiya, 1977. – 77s.
25. Wang Z-G., Inoue T. Analysis of temperature, structure and stress during quenching. Journal of the Society Materials Science of Japan. – 1983. – №360 – P.991-1003.
26. Teoreticheskiye osnovy obrabotki metallov davleniyem. [B.M.Ilyukovich, A.P.Ogurtsov, N.Ye.Nekhayev, S.V.Yershov]. T.2. – Dnepropetrovsk: RVA «Dnepr-VAL», 2002. – 485s.
27. Loshkarev V.Ye. Matematicheskoye modelirovaniye protsessa zakalki s uchetom vliyaniya napryazheniy na strukturnyye prevrashcheniya v stali. MiTOM, 1986. – № 1. – S.86-69.
28. Umemoto M., Horiuchi K., Tamura I. Transformation kinetic of bainite during isothermal holding and continuous cooling. Transaction of the Iron and Steel Institute of Japan. – 1982.- Vol 31.- №360. – P.991-1003.
29. Vafin R.K., Pokrovskiy A.M., Leshkovtsev V.G. Prochnost’ termoobrabatyvayemykh prokatnykh valkov. – M.: Izd-vo MGTU im. N.E. Baumana, 2004. – 264s.
30. Contribution des contraintes internes d’origine thermice dans le calcul de l’avancement des transformation de phase refroidissement continu d’un acier XC80. [S.Denis, C.Bas, F.M.B.Fernandes, A.Simon].l Memoires et Etudes Scientifique Revue de Metallurgie. – 1986. – Vol. 83. – №10. –
P.533-541.
31. Chernyshev A.P. Komp’yuternoye modelirovaniye strukturnykh i fazovykh prevrashcheniy v neizotermicheskikh usloviyakh. Izv. Vuzov. Chernaya metallurgiya. – 2001. – №2. – S.27-29.
32. Tanaka K., Sato Y. Analysis of super-plastic deformation during isothermal martensitic transformation. Res. Mechanica, – 1986. – Vol.17. – №3. – P.241-252.
33. Bobyr S.V. Non-equilibrium thermodynamic model austenitic non-diffusion transformation in iron-based alloys. Machines. Technologies. Materials. International Scientific Journal, 2018., Is. 10, P.415-418.
34. Christian J.W. The Theory of Transformations in Metals and Alloys, 1st Edition, Pergamon Press, Oxford, UK, 2002.
35. Krot P.V., Bobyr S.V., Dedik M.O. Simulation of backup rolls quenching with experimental study of deep cryogenic treatment. Int. J. of Microstructure and Materials Properties, 2017, Vol.12, No.3/4. – Р. 259–
275.