DOI: 10.52150/2522-9117-2018-32-309-316

Verenev Valentin Vladimirovich, Dr.Sci. (Engin.), Senior Research Scientist, Iron and Steel Institute named after Z.I. Nekrasovof the NAS of Ukraine, Academican Starodubova square, 1, Dnipro, Ukraine, 49107; e-mail: verenev0704@gmail.com, ORCID 0000-0002-2561-5365

Podobedov Nikolai Ivanovich, PhD (Engin.), Senior Research Scientist, Iron and Steel Institute named after Z.I. Nekrasov of the NAS of Ukraine, Academican Starodubova square, 1, Dnipro, Ukraine, 49107

Self-regulation during continuous rolling in broadband mills

Abstract. The aim of the work is the development of ideas about the regulation of the rolling process in continuous groups of stands of a wide-strip hot rolling mill. By mathematical modeling of the dynamics of the interaction of the stands during continuous rolling, taking into account torsional vibrations and transport transfer, the duration of the self-regulation time of the sixyielding group was determined. It is shown that the parameters of the rolled strip significantly affect the nature of the change in tensions and deviations of the strip thickness after each stand. During the filling of a continuous band with a strip in the mill stands, there are perturbations caused by the capture of the strip by the rolls of each stand. The task of regulatory actions at this point can increase the destabilization of the process. The thickness of the rolled strip slightly affects the self-regulation time of the continuous rolling process. In the modes of rolling and filling the group with a strip, this time was ~ 14 s from the beginning of the disturbance at the entrance to the group. The signs of perturbations and their combinations are determined by the deviation of the strip thickness and temperature, at which a short-term loss of process stability is possible due to a drop in tension in some intervals. It has been established that there are such combinations of perturbation signs in thickness and strip temperature when a group disintegrates into two unrelated ones, which leads to a violation of the stability of the tension process. The above features of selfregulation should be considered when managing the process of continuous rolling.
Keywords: continuous rolling, strip, thickness deviation, tension, selfregulation time

Reference
1. Vydrin V.I. Dinamika prokatnykh stanov / V.I. Vydrin. – Sverdlovsk: Metallurgizdat, 1960. – 225 s.
2. Chekmarev A.P., Toporovskiy M.P. Issledovaniye perekhodnykh protsessov v trekh kletyakh nepreryvnogo stana. Prokatnoye proizvodstvo. Sb. n. tr. ICHM. – M: Metallurgiya. – 1965. – T.XXI. – S.81–121.
3. Chekmarev A.P., Toporovskiy M.P. Vzaimosvyaz’ kletey i promezhutkov mezhdu nimi pri prokatke na nepreryvnom melkosortnom stane. Prokatnoye proizvodstvo. Sb. n. tr. ICHM. – M: Metallurgiya. – 1967. –
T.XXI. – S.5–64.
4. Druzhinin N.N. Nepreryvnyye stany kak ob»yekt avtomatizatsii. – M.: Metallurgiya. – 1975. – 336 s.
5. Faynberg YU.M. Avtomatizatsiya nepreryvnykh stanov goryachey prokatki. M: «Metallurgiya» . 1963.
6. Avtomatizirovannyye shirokopolosnyye stany, upravlyayemyye EVM. [M.A.Benyakovskiy, M.G.Anan’yevskiy, YU.V.Konovalov i dr.]. – M.: Metallurgiya. – 1984. – 240 s.
7. Verenev V.V. Perekhodnyye protsessy pri nepreryvnoy prokatke. [V.V.Verenev, A.YU.Putnoki, N.I.Podobedov]. Monografiya. – D.: Lítograf, 2017. – 116 s.