Фундаментальные и прикладные проблемы черной металлургии

DOI: 10.52150/2522-9117-2023-37-389-406

Balakhanova Tetiana Valeriivna, Ph. D. (Tech.), Senior Researcher, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, 49107, Ukraine. ORCID: 0000-0003-2493-218X

Chuiko Ihor Mykolaiovych, Ph. D. (Tech.), Senior Researcher, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, 49107, Ukraine. ORCID: 0000-0002-4753-614X

Parusov Eduard Volodymyrovych, D. Sc. (Tech.), Senior Researcher, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, 49107, Ukraine. ORCID: 0000-0002-4560-2043. E-mail: tometal@ukr.net

Oliinyk Eduard Vadymovych, Ph. D. Student, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, 49107, Ukraine. ORCID: 0000-0002-3366-3746

SOME ASPECTS OF THE USE OF STEEL DURING OUT OF REACTOR STORAGE AND TRANSPORTATION OF SPENT NUCLEAR FUEL. (REVIEW)

Abstract. In the world, the nuclear industry is considered an ideal option for an environmentally friendly source of energy generation, based on the separation of the radioactive nuclide of the chemical element 235U. When generating electricity from nuclear power plants, the main disadvantage is the generation of radioactive waste. After spent fuel is removed from a nuclear reactor, it is placed in special containers containing absorption and retention elements. It is obvious that the storage and transportation of spent nuclear fuel plays an important role in the development and overall safety of the nuclear industry, and high-quality neutron-absorbing materials are the basis for the successful manufacture of reliable structures and containers. The development of modern neutron absorption materials ensures reliability, safety, storage duration, as well as reducing the cost of logistics operations associated with the transportation of radioactive waste. Based on the results of the analysis of scientific and technical sources, modern ideas about materials for the manufacture of containers, which are used for storage and transportation of nuclear fuel waste, are summarized. The advantages and disadvantages of the main materials used in the disposal of spent nuclear fuel are considered. It has been established that, from an economic point of view, the most rational material for storing and transporting radioactive waste is ferritic stainless steel with a high boron content, which, in addition to absorption abilities, is characterized by other properties required for this type of product. Since boron has a low ability to dissolve in both austenite and ferrite, this leads to the formation of borides of various types, which contribute to the embrittlement of the structural material. At the same time, the distribution of borides over the volume of a metal product is determined not only by a set of properties, but also by the protective properties of the material, as well as the manufacturability of the final product from it. Despite the fact that boron-containing steels of the ferritic class have been known for a long time, issues related to the processes of structure formation, increasing technological and operational properties still remain insufficiently studied and controversial. There is also no information on the influence of heat treatment on the formation of the structure and mechanical properties of finished products made of ferritic stainless steels. Successful solution of these scientific and technical problems will ensure the production of modern high-quality neutron-absorbing containers for off-reactor storage and transportation of spent nuclear fuel.

Key words: spent nuclear fuel, shielding materials, neutron absorption, boron, ferritic stainless steel

DOI: https://doi.org/10.52150/2522-9117-2023-37-389-406

For citation: Balakhanova, T. V., Chuiko, I. M., Parusov, E. V., & Oliinyk, E. V. (2023). Some aspects of the use of steel during out of reactor storage and transportation of spent nuclear fuel. (Review). Fundamental and applied problems of ferrous metallurgy, 37, 389-406. https://doi.org/10.52150/2522-9117-2023-37-389-406

References

  1. Fernández-Arias, P., Vergara, D., & Antón-Sancho, Á. (2023). Global Review of International Nuclear Waste Management. Energies, 16, 6215. https://doi.org/
    10.3390/en16176215
  2. Fernández-Arias, P., Vergara, D., & Antón-Sancho, Á. (2023). Bibliometric Review and Technical Summary of PWR Small Modular Reactors. Energies, 16. https://doi.org/10.3390/en16135168
  3. Dolin, V., Frano, R., Kopylenko, O., & Cancemi, S. (2023). Assessment of the behavior of spent nuclear fuel in Ukraine. Safety of Nuclear Waste Disposal, 2, 199-200. https://doi.org/10.5194/sand-2-199-2023
  4. Khotiaintseva, O., Khotiaintsev, V., & Gulik, V. (2023). Radiological characteristics of spent nuclear fuel from small modular reactors under consideration for deployment in Ukraine. Nuclear Technology and Radiation, Protection, 38, 88-95. https://doi.org/10.2298/NTRP2302088K
  5. Transport of Radioactive Material (Updated January 2022) (2022). WEB: https://world-nuclear.org/information-library/nuclear-fuel-cycle/transport-of-nuclear-materials/transport-of-radioactive-materials.aspx
  6. Hryhorash, O., Dybach, O., Kondratiev, S., Horbachenko, O., Panchenko, A., Shuhailo, O., Kovbasenko, Y., Vyshemirskyi, M., Bohorad, V., & Byelykh, D., Shenderovych, V. (2017). Pitannya yadernoyi ta radiatsiynoyi bezpeki tsentralizovanogo shovischa vidpratsovanogo yadernogo paliva AES Ukrayini [Nuclear and Radiation Safety of the Centralized Spent Fuel Storage Facility in Ukraine]. Nuclear and Radiation Safety, 75, 3-10
  7. Fukuda, T., Kobata, M., Shobu, T., Yoshii, K., Kamiya, J., Iwamoto, Y., Makino, T., Yamazaki, Y., Ohshima, T., Shirai, Y., & Yaita, T. (2022). Direct energy conversion using Ni/SiC Schottky junction in 237Np and 241Am gamma ray regions. Journal of Applied Physics, 132, 245102. https://doi.org/10.1063/5.0099136
  8. Kurniawan, T. A., Othman, M. H. D., Singh, D., Avtar, R., Hwang, G. H., Setiadi, T., & Lo, W.-h. (2021). Technological solutions for long-term storage of partially used nuclear waste: A critical review. Annals of Nuclear Energy, 166, 108736. https://doi.org/10.1016/j.anucene.2021.108736
  9. Hu, G., & Pfingsten, W. (2023). Data-driven machine learning for disposal of high-level nuclear waste: A review. Annals of Nuclear Energy, 180, 109452. https://doi.org/10.1016/j.anucene.2022.109452
  10. He, J. Y., Soliman, S. E., Baratta, A. J., & Balliett, T. A. (2000). Fracture Mechanism of Borated Stainless Steel. Nuclear Technology, 130(2), 218-225. https://doi.org/10.13182/NT91-A34595
  11. Smith, R., Loomis, G., & Deltete, C. (1992). Borated stainless steel application in spent-fuel storage racks. Report. https://www.osti.gov/biblio/7024014
  12. Hafez, S., Elshazly, R., & Eissa, M., (2021). EL-Kameesy, S. High Borated Stainless-Steel Alloys for Nuclear Reactor Domains. Arab Journal of Nuclear Sciences and Applications, 54, 97–104. https://doi.org/10.21608/ajnsa.2021.29519.1352
  13. Li, Y.-W., Liu, H.-T., Wang, Z., Zhang, Z.-H., Li, W.-T., Shen, H.-Y., Zhang, X.-M., & Wang, G.-D. (2019). Solidification microstructure of high borated stainless steels with rare earth and titanium additions. Rare Metals, 39, 1483–1491. https://doi.org/10.1007/s12598-019-01247-w
  14. Li, Y.-W., Wang, Z., Liu, H.-T., & Li, G. (2022). Effect of Solution Treatment on the Microstructure and Mechanical Properties of High-Borated Steel Composites. Journal of Materials Engineering and Performance, 32. https://doi.org/10.1007/s11665-022-07312-3
  15. Cizek, P., Parker, B., Bijok, M., & Zuna, P. (1994). The Influence of Large Boride Particles on Microstructural Evolution in AISI 304 Steel. Isij International, 34(8), 679–688. https://doi.org/10.2355/isijinternational.34.679
  16. Chen, Y., Nie, J., Wang, F., Yang, H., Wu, C., Liu, X., & Zhao, Y. (2019). Revealing hetero-deformation induced (HDI) stress strengthening effect in laminated Al-(TiB2+TiC) p/6063 composites prepared by accumulative roll bonding. Journal of Alloys and Compounds, 815, 152285. https://doi.org/10.1016/j.jallcom.2019.152285
  17. Li, Y.-W., Liu, H.-T., Wang, Z., Zhang, X.-M., & Wang, G.-D. (2018). Suppression of edge cracking and improvement of ductility in high borated stainless steel composite plate fabricated by hot-roll-bonding. Materials Science and Engineering: A., 731. https://doi.org/10.1016/j.msea.2018.06.039
  18. Moon, J., Jang, J., Kim, S.-D., Lee, T.-H., Ha, H.-Y., Lee, C.-H., & Hong, H. (2020). Different aspect of solidification cracking susceptibility and hot ductility behavior of borated stainless steels and the effects of boron content. Materials Characterization, 164, 110319. https://doi.org/10.1016/j.matchar.2020.110319
  19. Sun, W., Hu, G., Xu, H., Li, Y., Wang, C., Men, T., Ji, F., Lao, W., Yu, B., & Sheng, L. (2022). Study on the Influence of Reinforced Particles Spatial Arrangement on the Neutron Shielding Performance of the Composites. Materials, 15(12), 4266. https://doi.org/10.3390/ma15124266
  20. Jung, Y., Lee, Y., Kim, J., & Ahn, S. (2021). Accelerated Corrosion Tests of Al-B4C Neutron Absorber Used in Spent Nuclear Fuel Pool. Journal of Nuclear Materials, 552, 153011. https://doi.org/10.1016/j.jnucmat.2021.153011
  21. Jung, Y., Lee, M., Kim, K., & Ahn, S. (2020). 10B(n, α)7Li reaction-induced gas bubble formation in Al–B4C neutron absorber irradiated in spent nuclear fuel pool. Journal of Nuclear Materials, 533, 152077. https://doi.org/10.1016/j.jnucmat.2020.152077
  22. Xue, X., Wang, C., Tao, J., Cao, X.-Z., Ri, R., & Yang, H. (2013). Research Progress on Aluminum-Boron Compounds (Al-B) and Its Composite Materials. Bulletin of the Chinese Ceramic Society. Journal of Inorganic Materials, 32, 2037-2045. Link: https://bit.ly/3161Gy5
  23. Lindquist, K. (2022). Handbook of Neutron Absorber Materials for Spent Nuclear Fuel Transportation and Storage Applications: Technical Report. Electric Power Research Institute: Palo Alto, CA, USA. https://www.epri.com/research/
    products/000000003002018496
  24. Huang, M., Fan, G.-H., Geng, L., Cao, G., Du, Y., Wu, H., Zhang, T., Kang, H., Wang, T., Du, G., & Xie, H. (2016). Revealing extraordinary tensile plasticity in layered Ti-Al metal composite. Scientific Reports, 6, 38461. https://doi.org/10.1038/srep38461
  25. So, K., Chen, D., Kushima, A., Li, M., Kim, S., Yang, Y., Wang, Z., Park, J., Lee, Y.-H., Gonzalez, R., Kiwi, M., Bringa, E., Shao, L., & Li, J. (2016). Dispersion of carbon nanotubes in aluminum improves radiation resistance. Nano Energy, 22. https://doi.org/10.1016/j.nanoen.2016.01.019
  26. Wu, S., Li, H., Futaba, D., Chen, G., Chen, C., Zhou, K., Zhang, Q., Li, M., Ye, Z., & Xu, Ming. (2022). Structural Design and Fabrication of Multifunctional Nanocarbon Materials for Extreme Environmental Applications. Advanced Materials, 34. https://doi.org/10.1002/adma.202201046
  27. Huo, Z., Zhao, S., Zhong, G., Zhang, H., & Hu, L. (2021). Surface modified-gadolinium/boron/polyethylene composite with high shielding performance for neutron and gamma-ray. Nucl. Mater. Energy, 29, 101095–101107. https://doi.org/10.1016/j.nme.2021.101095
  28. Wang, P., Tang, X., Chai, H., Chen, D., & Qiu, Y. (2015). Design, fabrication, and properties of a continuous carbon-fiber reinforced Sm2O3/polyimide gamma ray/neutron shielding material. Fusion Eng. Des., 101, 218–225. https://doi.org/
    10.1016/j.fusengdes.2015.09.007
  29. Li, X., Wu, J., Tang, C., He, Z., Yuan, P., Sun, Y., Lau, W.-M., Zhang, K., Mei, J., & Huang, Y. (2018). High temperature resistant polyimide/boron carbide composites for neutron radiation shielding. Composites Part B: Engineering, 159. https://doi.org/10.1016/ j.compositesb.2018.10.003
  30. Kim, T.-M., Dho, H.-S., Cho, C.-H., & Ko, J.-H. (2017). Preliminary Shielding Analysis of the Concrete Cask for Spent Nuclear Fuel Under Dry Storage Conditions. Journal of the Nuclear Fuel Cycle and Waste Technology (JNFCWT), 15, 391–402. https://doi.org/10.7733/jnfcwt.2017.15.4.391
  31. Tanaka, T., Hagiwara, K., Gazzola, E., Ali, A., Ou, I., Sudo, T., Das, P. K., Reen, M. S., Dhir, R., Koshio, Y., Sakuda, M., Kimura, A., Nakamura, S., Iwamoto, N., Harada, H., Collazuol, G., Lorenz, S., Wurm, M., Focillon, W., Gonin, M., & Yano, T. (2020). Gamma-ray spectra from thermal neutron capture on gadolinium-155 and natural gadolinium. Progress of Theoretical and Experimental Physics, 2020(4), 043D02. https://doi.org/10.1093/ptep/ptaa015
  32. Piotrowski, T. (2020). Shielding concrete with neutron attenuating and absorbing components. Micro and Nanostructured Composite Materials for Neutron Shielding Applications, 177–218. https://doi.org/10.1016/B978-0-12-819459-1.00007-6
  33. Divya, M., & Albert, S. K. (2018). Weldability Study on SS 304B4 Joined using Boron Containing Austenitic Stainless Steel Consumable. Journal of Welding and Joining, 36(6), 60–70. https://doi.org/10.5781/JWJ.2018.36.6.10
  34. Hadzihafizovic, D. (2023). Stainless steel classification
  35. Pobol, Y. L. (2017). Primenenie elektronno-luchevyih tehnologiy – etap resheniya problemyi obrascheniya s otrabotavshim yadernyim toplivom [The use of electron beam technologies is a stage in solving the problem of spent nuclear fuel management]. Bulletin of Polotsk State University. Series B. Industry. Applied Science, 3, 35–42
  36. Baddoo, N. R. (2008). Stainless Steel in Construction: A Review of Research, Applications, Challenges and Opportunities. Journal of Constructional Steel Research, 64, 1199-1206. https://doi.org/10.1016/j.jcsr.2008.07.011
  37. Nickel – 2023 Data – 1993-2022 Historical – 2024 Forecast – Price – Quote – Chart (tradingeconomics.com)
  38. Charles, J., Mithieux, J. D., Santacreu, P. O., & Peguet, L. (2009). The ferritic stainless family: the appropriate answer to nickel volatility? Revue De Metallurgie-cahiers D Informations Technique, 106, 124-139. https://doi.org/10.1051/
    metal/2009024
  39. Silva, D., Nascimento, A., Koga, G., Zepon, G., Kiminami, C., Botta, W., & Bolfarini, C. (2023). Alloy design for microstructural-tailored boron-modified ferritic stainless steel to ensure corrosion and wear resistance. Journal of Materials Research and Technology, 24, 418–429. https://doi.org/10.1016/j.jmrt.2023.03.023
  40. Wang, Z., Li, Y.-W., Wang, G.-D., & Liu, H.-T. (2020). Effects of boron content on the microstructure and mechanical properties of twin-roll strip casting borated steel sheets. Materials Science and Engineering: A, 793, 139847. https://doi.org/10.1016/j.msea.2020.139847
  41. Sposob izgotovleniya trubnoy zagotovki s odnorodnoy strukturoy [Method of conversion pipe manufacturing in pipe rolling plants with pilger mills of low-elasticity steel with boron content of 1,3-1,8 %]. № 2334571C2 Russian. № 2006139464/02A; 07.11.2006; published 27.09.2008. Bulletin No. 27
  42. Shestigrannaya truba–zagotovka iz stali s soderzhaniem bora ot 1,3 do 3,0 % i sposob eyo izgotovleniya [Hexagon steel pipe-billet with boron content of 1,3 to 3,0 % and method of its manufacture]: pat. 2618687 Russian. № 2016110316; 22.03.2016; published 10.05.2017. Bulletin No. 13
  43. Nikitin, K. N., Osadchiy, V. Ya., Safyanov, A. V., Kolikov, A. P., Bubnov, K. E. (2016). Sovershenstvovanie tehnologii proizvodstva besshovnyih shestigrannyih trub iz borsoderzhaschih staley [Improving the production technology of seamless hexagonal pipes made of boron steels]. Ferrous metals, 10, 39–43

No widgets added. You can disable footer widget area in theme options - footer options

Фундаментальные и прикладные проблемы черной металлургии
Logo