Фундаментальные и прикладные проблемы черной металлургии

DOI: 10.52150/2522-9117-2023-37-407-433

Gubenko Svitlana Ivanivna, D. Sc. (Tech.), Professor, Senior Researcher, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, 49107, Ukraine. Prydniprovska State Academy of Civil Engineering and Architecture, Arkhitektora Oleha Petrova Str., 24a, Dnipro, 49005, Ukrane. ORCID: 0000-0001-6626-3979. E-mail: sigubenko@gmail.com

Parusov Eduard Volodymyrovych, D. Sc. (Tech.), Senior Researcher, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, 49107, Ukraine. ORCID: 0000-0002-4560-2043. E-mail: tometal@ukr.net

Parusov Oleh Volodymyrovych, Ph. D. (Tech.), Senior Researcher, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, 49107, Ukraine. ORCID: 0000-0002-9879-6179

THE SHAPE CHANGE AND REDISTRIBUTION OF NON-METALLIC INCLUSIONS IN STEELS DURING WORKING BY PRESSURE

Abstract. Peculiarities of the shape change and redistribution of non-metallic inclusions of various types during working by pressure of steels (rolling, forging, drawing) were investigated. The concept of plastic deformation of inclusions is considered from the standpoint of physical mesomechanics of heterophase alloys. It is shown that non-metallic inclusions contribute to the localization of plastic deformation, which is accompanied by the interaction of non-metallic inclusions and the steel matrix, which determines their common plastic change in shape and redistribution of inclusions in the steel matrix. The peculiarities of these processes under different types and temperature regimes of working by pressure, which determines the nature of stresses near the inclusions and the plastic flow of the steel matrix, have been established. It is shown that the temperature regime of pressure treatment determines the possibility of relaxation processes in the steel matrix near the inclusions and the level of plasticity of the inclusions themselves and the inclusion-matrix interphase boundaries. The influence of the temperature regime of hot deformation of sheet steels and wire rod on the nature of shape change and the deformability of plastic inclusions and their destruction (brittle or ductile), as well as the plasticity of the steel matrix, frictional forces at the inclusion-matrix boundaries, and the plasticity of the latter during hot rolling were established. It is shown that when considering the plastic behavior of non-metallic inclusions in a plastic steel matrix, the behavior of the inclusion-matrix interphase boundaries under different deformation conditions is of great importance. Peculiarities of the dynamic character of the joint deformation of the inclusion-matrix system, which is associated with the development of competing processes at the interphase boundaries of the inclusion-matrix: interphase friction and slipping, have been studied. The features of hot and cold slipping occurring at different deformation temperatures are discussed. It is shown that the mechanisms of each of the mentioned processes depend on the temperature regime of the deformation, the level of plasticity of the inclusions and the steel matrix. The influence of the method of cold deformation (rolling and drawing) on the shape change of plastic inclusions and the redistribution of non-deformable inclusions in the steel matrix was established. The processes that determine the level of plasticity of non-metallic inclusions and inclusion-matrix boundaries and significantly affect the nature of the shape change of inclusions and their redistribution in the steel matrix in the process of the working by pressure of steels, which affect their technological plasticity at different temperatures and methods of deformation, are considered.

Key words: steel, non-metallic inclusions, working by pressure, rolling, drawing, plastic deformation, sheet steel, wire rod, steel matrix, inclusion-matrix interphase boundaries, interphase friction, slipping.

DOI: https://doi.org/10.52150/2522-9117-2023-37-407-433

For citation: Gubenko, S. I., Parusov, E. V., & Parusov, O. V. (2023). The shape change and redistribution of non-metallic inclusions in steels during working by pressure. Fundamental and applied problems of ferrous metallurgy, 37, 407-433. https://doi.org/10.52150/2522-9117-2023-37-407-433

References

  1. Wang, J., Shen, Y., Liu, Y., Wang, F., & Jia, N. (2019). Tailoring Strength and Ductility of a Cr-Containing High Carbon Steel by Cold-Working and Annealing. Materials, (12), 4136. https://doi.org/10.3390/ma12244136
  2. Kusche, C. F., Gibson, J. S.-L., Wollenweber, M. A., & Korte-Kerzel, S. (2020). On the mechanical properties and deformation mechanisms of manganese sulphide inclusions. Material & Design, 193(2), 108801. https://doi.org/10.1016/j.matdes.2020.108801
  3. Novokshchenova, S. M., Sveshnikova, G. A., Yunakova, I. V., & Guley, G. G. (1978). Vliyaniye nemetallicheskikh vklyucheniy na goryachuyu tekhnologicheskuyu plastichnost’ stali i splavov [The influence of non-metallic inclusions on the hot technological plasticity of steel and alloys]. In the book: “Steel and non-metallic inclusions“. Moscow : Metallurgy, pp 84–94
  4. Qayyum, F., Umar, M., Elagin, V., Kirschner, M, & Hoffman, F. (2022). Influence of Non-Metallic Inclusions on Local Deformation and Damage Behavior of Modified 16MnCrS5 Steel Crystals, (12), 281–288. https://doi.org/10.3390/cryst12020281
  5. Liu, N., Cheng, G., Zhang, L., & Yang, W. (2022). Composition evolution and deformation of different non-metallic inclusions in a bearing steel during hot rolling. Journal of Iron and Steel Research International, (4), 345–352. https://doi.org/10.2355/isijinternational.ISIJINT-2022-235
  6. Vinograd, M. I., & Gromova, G. P. (1972). Vklyucheniya v legirovannykh stalyakh i splavakh [Inclusions in alloy steels and alloys]. Metallurgy
  7. Gubenko, S. I., & Galkin, A. M. (1984).  K voprosu o prirode krasnolomkosti stali [On the question of the nature of the red brittleness of steel. Metallurgy and heat treatment of metals], 10, 11-15
  8. Gubenko, S. I., & Parusov, E. V. (2003). Influence of Eutectic-Type Inclusions on the Red Brittleness of Steels. Materials Science, 58(6), 731–739. https://doi.org/10.1007/s11003-023-00723-0
  9. Panin, V. E., Likhachev, V. A., & Grinyaev, Yu. V. (1985). Strukturnyye urovni deformatsii tverdykh tel [Structural levels of deformation of solids]. Nauka
  10. Gubenko, S. I. (2016). Nemetallicheskiye vklyucheniya i plastichnost’ staley [Non-metallic inclusions and ductility of steels. The physical basis of the ductility of steels]. Saarbrücken : LAP LAMBERT. Palmarium academic publishing
  11. Gubenko, S. I., & Oshkadepov, S. P. Nemetallicheskie vkluchenija v stali [Non-metallic inclusions in steel]. Naukova dumka
  12. Gubenko, S. I., & Kodzhaspirov, G. E. (1994).  Povedeniye nemetallicheskikh vklyucheniy pri obrabotke stali davleniyem [Behavior of non-metallic inclusions during steel pressure treatment]. Metals, (1), 75–83
  13. Belchenko, G. I., & Gubenko, S. I. (1983). Deformation of non-metallic inclusions during steel rolling. Metally, (4), 80–84
  14. Pickering, F. B. J., & Met, A. (1958). Some influence of mechanical working on the deformation of non-metallic inclusions. J. Iron and Steel Inst., 189(3), 148-159.
  15. Spies, H.-I. (1971). Povedeniye nemetallicheskikh vklyucheniy v stali pri kristallizatsii i deformatsii. [Behavior of nonmetallic inclusions in steel during crystallization and deformation]. Metallurgy
  16. Rudnic, S. J. (1962). Deformation of binary non-metallic inclusions. Journal Iron and Steel Institute, 29(5), 177–180
  17. Malkiewicz, T., & Rudnic, S. J. (1963). Deformation of non-metallic inclusions. Journal Iron and Steel Institute, 201, 33-38
  18. André Luiz Vasconcellos da Costa e Silva. (2019). The effects of non-metallic inclusions on properties relevant to the performance of steel in structural and mechanical applications. Journal of Materials Research and Technology,  (8), 2408-2422. https://doi.org/10.1016/j.jmrt.2019.01.009
  19. Qayyum, F., Tseng, Shao-Chen, Guk, S., & Ulrich, Prahl. (2023). Examining the Effect of MnS Particles on the Local Deformation Behavior of 8MnCrS4-4-13 Steel by In Situ Tensile Testing and Digital Image Correlation. Journal. Composite Scienсe, 7(7), 294. https://doi.org/10.3390/jcs7070294
  20. Wang, Y., & Liu, C. (2022). Evolution and Deformability of Inclusions in Steel Containing Rare-Earth Element Under Different Deoxidation Conditions. Steel Research International. https://doi.org/10.1002/srin.202200027
  21. Wang, Y., Yang, Y., Dong, Z., Park, JH., Mi, Z., Mao, X., & Mu, W. (2022). Inclusion Engineering in Medium Mn Steels: Effect of Hot-Rolling Process on the Deformation Behaviors of Oxide and Sulfide Inclusions. Metallurgical and Materials Transactions, 53, 2182-2197. https://doi.org/10.1007/s11663-022-02517-2
  22. Honeycombe, R. (1972). Plasticheskaya deformatsiya metallov [Plastic deformation of metals]. Mir
  23. Belchenko, G. I., & Gubenko, S. I. (1980). Nemetallicheskiye vklyucheniya i kachestvo stali [Non-metallic inclusions and steel quality]. Technika
  24. Gubenko, S. I. (2020). Priroda plastichnosti geterofaznykh vklyucheniy pri obrabotke staley davleniyem [The nature of plasticity of heterophase inclusions during pressure treatment of steels]. Steel,  (10), 54–63
  25. Gubenko, S. I. (2020). Plasticity Origin of Heterophase Inclusions at Steel Forming. Steel in Translation, 50(10), 730-739
  26. Gubenko S. Geterofaznyke mikrokompozitnyye vklyucheniya v stalyakh. [Heterophase microcomposite inclusions in steels]. Germany-Mauritius, Beau Bassin : Palmarium academic publishing, 2019. 330 p. (in Russian).
  27. Gubenko, S. I., Parusov, V. V., & Derevyanchenko, I. V. (2005). Nemetallicheskiye vklyucheniya v stali [Non-metallic inclusions in steel]. ART-PRESS
  28. Parusov, V. V., Sychkov, A. B., & Parusov, E. V. (2012). Teoreticheskiye i tekhnologicheskiye osnovy proizvodstva vysokoeffektivnykh vidov katanki [Theoretical and technological basis for the production of highly efficient types of wire rod]. ART-PRESS
  29. Parusov, E. V., Nesterenko, A. M., Lutsenko, V. A., & Sychkov, A. B. (2004). Kriterial’naya otsenka vliyaniya nemetallicheskikh vklyucheniy na obryvnost’ pri volochenii kordovoy provoloki iz stali 70[Criteria assessment of the influence of non-metallic inclusions on breakage when drawing cord wire from steel 70]. Fundamental and applied problems of ferrous metallurgy, 7, 216-219
  30. Parusov, E. V., Gubenko, S. I., Sychkov, A. B., Sagura, L. V., & Chuiko, I. N. (2017). O povedenii nemetallicheskikh vklyucheniy na raznykh stadiyakh deformatsii pri proizvodstve vysokoprochnoy provoloki [On the behavior of non-metallic inclusions at different stages of deformation in the production of high-strength wire.]. Problems of tribology, (3), 6-15
  31. Gubenko, S. I. (2017). Mezhfaznyye granitsy vklyucheniye-matritsa v stalyakh. Mezhfaznyye granitsy nemetallicheskoye vklyucheniye-matritsa i svoystva staley [Inclusion-matrix interfaces in steels. Non-metallic inclusion-matrix interface and properties of steels]. Germany-Mauritius, Beau Bassin : Palmarium academic publishing
  32. Gubenko, S. I., & Iskov, M. V. (2004). K voprosu o stroyenii mezhfaznykh granits nemetallicheskoye vklyucheniye-matritsa v stali [On the question of the structure of interphase boundaries non-metallic inclusion-matrix in steel]. Theory and Practice of Metallurgy, (5), 30-38
  33. Gubenko, S. I. (1994). K voprosu o stroyenii mezhfaznykh granits nemetallicheskoye vklyucheniye-matritsa v stali [To the question of the structure of interphase boundaries non-metallic inclusion-matrix in steel]. Metals, (6), 105-112
  34. Gubenko, S. I. (1999). Lokal’nyye piki parametrov i protsessov na granitsakh nemetallicheskoye vklyucheniye-matritsa stali. [Local peaks of parameters and processes at the non-metallic inclusion-matrix boundaries of steel]. Steel, (8), 64-67
  35. Gubenko, S. I. (1999). Priroda vspleskov mikroneodnorodnoy deformatsii v stali s nemetallicheskimi vklyucheniyami [The nature of bursts of micro-inhomogeneous deformation in steel with non-metallic inclusions]. Physical and chemical mechanics of materials,  (2), 53-59
  36. Gubenko, S. I. (2020). Rol’ mezhfaznykh granits vklyucheniye-matritsa stali v razvitii relaksatsionnykh protsessov vblizi nemetallicheskikh vklyucheniy [The role of steel inclusion-matrix interfaces in the development of relaxation processes near non-metallic inclusions]. Metallurgy and heat treatment of metals, (5), 3–10
  37. Gubenko, S. (2020). Role of Inclusion–Matrix Steel Interphase Boundaries in the Development of Relaxation Processes near Nonmetallic Inclusions. Metal Science and Heat Treatment, 62, 299-305. https://doi.org/10.1007/s11041-020-00558-5
  38. Gubenko, S. I. (2021). Relaksatsionnyye protsessy vblizi vklyucheniy i na mezhfaznykh granitsakh vklyucheniye-matritsa stali [Relaxation processes near inclusions and at inclusion-matrix interfaces of steel]. Metals, (3), 49-60
  39. Gubenko, S. I. (2021). Relaxation Processes near Inclusions and at Inclusion/Matrix Interfaces. Metals, 2021(5), 611-620. https://doi.org/10.1134/S0036029521050074
  40. Gubenko, S. I. (1996). Vliyaniye proskal’zyvaniya vdol’ granits nemetallicheskoye vklyucheniye-matritsa na raspredeleniye lokal’noy mikroneodnorodnoy deformatsii v armko-zheleze i stali. [Influence of slippage along the boundaries of a non-metallic inclusion-matrix on the distribution of local micro-inhomogeneous deformation in armco iron and steel]. Physics of metals and metal science, 82(3), 167-175.
  41. Samsonov, G. V., Pryadko, I. F., & Pryadko, L. F. (1971). Konfiguratsionnaya model’ veshchestva [Configuration model of matter]. Naukova Dumka
  42. Gubenko, S. I., & Parusov, E. V. (2017). Plastichnost’ splavov s razlichnoy strukturoy. Uchebnoye posobiye po fizicheskim osnovam plastichnosti [Plasticity of alloys with various structures. Study Guide on the Physical Basics of Plasticity]. Palmarium academic publishing
  43. Gubenko, S. (2020). Fizicheskaya priroda plastichnosti i uprochneniya metallov pri deformatsii [Physical nature of plasticity and strengthening of metals upon deformation]. LAP LAMBERT academic publishing

No widgets added. You can disable footer widget area in theme options - footer options

Фундаментальные и прикладные проблемы черной металлургии
Logo