Фундаментальные и прикладные проблемы черной металлургии

DOI: 10.52150/2522-9117-2023-37-4-25

Tuboltsev Leonid Gryhorovych, Ph. D. (Tech.), Senior Researcher, Head of Department, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, 49107, Ukraine. ORCID: 0000-0001-9540-3037. E-mail: isi.tubol@gmail.com

Chaika Oleksii Leonidovych, Ph. D. (Tech.), Senior Researcher, Head of Laboratory, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, 49107, Ukraine. ORCID: 0000-0003-1678-2580. E-mail: chaykadp@gmail.com

Babachenko Oleksandr Ivanovych, D. Sc. (Tech.), Senior Researcher, Director, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, 49107, Ukraine. ORCID: 0000-0001-7501-4173. E-mail: office.isi@nas.gov.ua

PROSPECTS OF TECHNOLOGICAL DEVELOPMENT OF METALLURGICAL PRODUCTION IN UKRAINE DUE TO THE USE OF NEW TECHNOLOGIES

Abstract. The development of directions for decarbonization of steel production with the aim of increasing energy efficiency and improving environmental indicators by reducing carbon dioxide emissions is an urgent and promising task of today’s world metallurgy. In recent years, a new constraint has appeared on industrial production – the 2015 UN Paris Agreement requires countries to ensure the transition to steel production with limited or zero carbon dioxide (CO2) emissions in order to reduce the impact of industry on the environment. The purpose of the article is to analyze the strategic aspects of the technological development of the metallurgical industry and the decarbonization of steel production on the basis of technology transfer and the development of theoretical and methodological bases for the analysis of energy saving directions. The work presents the results of the analysis of directions for reducing carbon dioxide emissions and reducing carbon consumption in metallurgical production due to the improvement of existing and the introduction of innovative technologies. The results of theoretical and experimental research on reducing CO2 emissions conducted in the world and in Ukraine are presented. The world leaders in the development of technical and technological solutions for reducing CO2 emissions in metallurgical production are the companies of most industrialized countries. Examples of new technologies that reduce CO2 emissions are given. It is shown that developments in the decarbonization of steel production have not yet reached the level that requires a significant reduction in CO2 emissions. The prospect of creating innovative technologies is related to the use of hydrogen in metallurgical production. But the solutions proposed by foreign companies are not always possible to apply to the metallurgical production of Ukraine, they require scientific study and adaptation to the conditions of Ukraine, including taking into account the energy balance of enterprises, raw material conditions, the level of technology and competitiveness of metal products, the availability of energy carriers. The conditions to which the general strategy of decarbonization of steel production must comply have been determined. In Ukraine, it is necessary to develop its own concept of reducing CO2 emissions, taking into account the preservation of the competitiveness of products. Therefore, it is very important to evaluate and analyze the directions for reducing CO2 emissions in the metallurgy of the country and abroad for the further reduction of carbon dioxide emissions in relation to the existing and prospective conditions of operation of metallurgical enterprises of Ukraine.

Key words: steel production, ecology, decarbonization, technologies, CO2 emissions.

DOI: https://doi.org/10.52150/2522-9117-2023-37-4-25

For citation: Tuboltsev, L. G., Chaika, O. L., & Babachenko, O. I. (2023). Prospects of technological development of metallurgical production in Ukraine due to the use of new technologies. Fundamental and applied problems of ferrous metallurgy, 37, 4-25. https://doi.org/10.52150/2522-9117-2023-37-4-25

References

  1. Bataille, C., Nilsson, L. J., & Jotzo, F. (2021). Industry in a net-zero emissions world: New mitigation pathways, new supply chains, modelling needs and policy implications. Energy and Climate Change, 2, 100059. https://doi.org/10.1016/
    j.egycc.2021.100059
  2. Omelyanenko V. (2015). Analysis of strategycal aspects of technology transfer in metallurgy. Metallurgical and Mining Industry, (12), 394-397. https://www.metaljournal.com.ua/assets/Journal/english-edition/MMI_2015_12/061
    Omelyanenko.pdf
  3. Liang, T., Wang, S., Lu, C., Jiang, N., Long, W., Zhang, M., & Zhang, R. (2020). Environmental impact evaluation of an iron and steel plant in China: Normalized data and direct/indirect contribution. Journal of Cleaner Production, 264, 121697. https://doi.org/10.1016/j.jclepro.2020.121697
  4. Best Available Techniques (BAT) Reference Document for Iron and Steel Production. Industrial Emissions Directive 2010/75/EU. Integrated Pollution Prevention and Control. (2012). https://publications.jrc.ec.europa.eu/repository/handle/JRC69967
  5. Perpiñán, J., Bailera, M., Romeo, L. M., Peña, B., & Eveloy, V. (2021). CO2 Recycling in the Iron and Steel Industry via Power-to-Gas and Oxy-Fuel Combustion. Energies, 14(21), 7090. https://doi.org/10.3390/en14217090
  6. Cavaliere, P. (2022). Hydrogen Assisted Direct Reduction of Iron Oxides. Springer Cham. https://doi.org/10.1007/978-3-030-98056-6
  7. Kim, W.-H., Lee, S., Kim, S.-M., & Min, D.-J. (2013). The retardation kinetics of magnetite reduction using H2 and H2–H2O mixtures. International Journal of Hydrogen Energy, 38(10), 4194-4200, https://doi.org/10.1016/j.ijhydene.2013.01.147
  8. World direct reduction statistics. (2007). Midrex Technologies, Inc. https://www.midrex.com
  9. Harpprecht, C., Naegler, T., Steubing, B., Tukker, A., & Simon, S. (2022). Decarbonization scenarios for the iron and steel industry in context of a sectoral carbon budget: Germany as a case study. Journal of Cleaner Production, 380, Part 2, 134846. https://doi.org/10.1016/j.jclepro.2022.134846
  10. Abdelrahim, A., Iljana, M., Omran, M., Vuolio T., Bartusch, H., & Fabritius, T. (2020). Influence of H2–H2O Content on the Reduction of Acid Iron Ore Pellets in a CO–CO2–N2 Reducing Atmosphere. ISIJ International, 60(10), 2206-2217. https://doi.org/10.2355/isijinternational.ISIJINT-2019-734
  11. Fischedick, M., Marzinkowski, J., Winzer, P., & Weigel, M. (2014). Techno-economic evaluation of innovative steel production technologies, Journal of Cleaner Production, 84, 563-580. https://doi.org/10.1016/j.jclepro.2014.05.063.
  12. Hydrogen steelmaking for a low-carbon economy. A joint LU-SEI working paper for the HYBRIT project. (2018). Stockholm Environment Institute. https://www.sei.org/wp-content/uploads/2018/09/hydrogen-steelmaking-for-a-low-carbon-economy.pdf/
  13. En:fomer (23 November 2023). We’ve climbed the foothills, now let’s tackle the mountain. https://www.en-former.com/en/weve-climbed-the-foothills-now-lets-tackle-the-mountain/
  14. Bielousova, K. (12 August 2022). U Shvetsii proiekt HYBRIT mozhe zabezpechyty “zelenu revoliutsiiu” u metalurhii [In Sweden, the HYBRIT project can bring about a “green revolution” in metallurgy]. [in Ukrainian] https://ecopolitic.com.ua/ua/news/u-shvecii-proiekt-hybrit-mozhe-zabezpechiti-zelenu-revoljuciju-u-metalurgii/
  15. Tang, J., Chu, M.-S., Li, F., Feng, C., Liu, Z.-G, & Zhou, Y.-S. (2022). Development and progress on hydrogen metallurgy. International Journal of Minerals, Metallurgy and Materials, 27(6), 713-723. https://doi.org/10.1007/s12613-020-2021-4
  16.  Plaza, M. G., Martínez, S., Rubiera, F. (2020). CO2 Capture, Use, and Storage in the Cement Industry: State of the Art and Expectations. Energies, 13(21), 5692. https://doi.org/10.3390/en13215692
  17. YENA Engineering. 4 Latest Technologies in Steel Industry. https://yenaengineering.nl/4-latest-technologies-in-steel-industry/
  18. The ORC Technologyh. (2023). https://www.turboden.com/turboden-orc-technology/1062/the-orc-technology
  19. Organic Rankine cycle. (2023). https://en.wikipedia.org/wiki/Organic_Rankine_cycle
  20. Organic Rankine cycle. CoolScienceVideos. https://www.youtube.com/watch?v=jU2AlRRlQDc
  21. Converter carbon steelmaking – boost your competitive edge with full-line solutions from the process inventor. (2023). Primetals Technologies. https://www.primetals.com/portfolio/steelmaking/converter-carbon-steelmaking/
  22. Korchenko, V. P., Tuboltcev, L. G., Poliakov, V. F., Padun, N. I., & Semykina, T. S. (2004). Opredelenie pokazatelei kislorodno-konverternoi plavki pri perekhode na maloshlakovye tekhnologii. Fundamental and applied problems of ferrous metallurgy, 9, 97–106
  23. Molten Oxide Electrolysis (MOE) for Steelmaking. (2023). https://www.bostonmetal.com/moe-technology/
  24. Temple, J. (24 September 2018). A new way to make steel could cut 5% of CO2 emissions at a stroke. MIT Technology review. URL: https://www.technologyreview.com/2018/09/24/2024/this-mit-spinout-could-finally-clean-up-steel-one-of-the-globes-biggest-climate-polluters/
  25. Journal of The Electrochemical Society. URL: http://jes.ecsdl.org/content/162/1/E13.full
  26. Allanore, A., Yin, L., & Sadoway, D. (2013). A new anode material for oxygen evolution in molten oxide electrolysis. Nature, 497, 353-356. https://doi.org/10.1038/nature12134
  27. Bondar, H. (15 Desember 2021). Dekarbonizatsiia metalurhii stane mozhlyvoiu v Ukraini zavdiaky memorandumu “Metinvestu” z SMS group [in Ukrainian]. UNIAN: informatsiine ahentstvo. https://www.unian.ua/ecology/dekarbonizaciya-virobnictva-stali-ta-chavunu-stane-mozhlivoyu-v-ukrajini-zavdyaki-memorandumu-mizh-metinvestu-z-sms-group-11643385

No widgets added. You can disable footer widget area in theme options - footer options

Фундаментальные и прикладные проблемы черной металлургии
Logo