Podobedov Nikolai Ivanovich, PhD (Engin.), Senior Research Scientist, Iron and Steel Institute named after Z.I. Nekrasov of the NAS of Ukraine, Academican Starodubova square, 1, Dnipro, Ukraine, 49107
Verenev Valentin Vladimirovich, Dr.Sci. (Engin.), Senior Research Scientist, Iron and Steel Institute named after Z.I. Nekrasovof the NAS of Ukraine, Academican Starodubova square, 1, Dnipro, Ukraine, 49107; e-mail:verenev0704@gmail.com, ORCID 0000-0002-2561-5365
Korennoy Vladimir Vitalievich, Researcher, Iron and Steel Institute named after Z.I. Nekrasov of the NAS of Ukraine, Academican Starodubova square, 1, Dnipro, Ukraine, 49107; e-mail: koren_noy@ukr.net

The evaluation of effectiveness of the device “Coilbox” on the mill 1680

Abstract. The aim of the work is to conduct a comparative analysis of the
results of rolling hot-rolled strips in the finishing group of mill stands of 1680
strips with and without the use of an intermediate rewinding device (PUF). A
comparative analysis of the results of measurements of the moment and
longitudinal thickness during rolling in the finishing group of stands is given.
Given the distribution of torque in the cages along the length of the strip. It is
shown that the mean square deviation of the moment is noticeably less than the
rolling time without PUF. The level of dynamic loads and the dynamic factor of
the moment of elastic force during the rolling of bands with polyurethane foam
and without polyurethane foam practically did not change. It is shown that
when rolling without PUF on the finished strip there remains a trace of the
temperature wedge in the form of a wedge of thickness. When rolling with
PUF, the thickness of the strip along its length becomes more uniform. When
rolling without PUF, a trace of a wedge of thickness in the form of a wedge
remains on the finished strip. When rolling with PUF, the thickness of the strip
along its length becomes more uniform. In general, a comparison of the average
moment along the stripes, the standard deviation, the coefficient of variation of
the moment and the deviation of the thickness shows the advantages of rolling
with PUF.