DOI: 10.52150/2522-9117-2022-36-265-284
Razdobreev Valerii Guriiovych, Ph. D. (Tech.), Senior Researcher, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, Ukraine, 49107. ORCID: 0000-0001-7402-7992. E-mail: office.isi@nas.gov.ua
Palamar Dmytro Gryhorovych, Junior Researcher, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, Ukraine, 49107. ORCID: 0000-0002-9503-3248
Kluychnikov Kyrylo Yuriiovych, Junior Researcher, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, Ukraine, 49107. ORCID: 0000-0003-2465-3244
Leshchenko Oleksandr Ivanovych, Junior Researcher, Iron and Steel Institute of Z. I. Nekrasov National Academy of Sciences of Ukraine, Academican Starodubova Square, 1, Dnipro, Ukraine, 49107. ORCID: 0000- 0003-1877-8358
RESEARCH OF TECHNOLOGICAL PARAMETERS OF HOT VARIETY ROLLING IN THE PRODUCTION OF CORROSION-RESISTANT AND FIRE-RESISTANT REINFORCEMENT ROLLING
Summary. The purpose of the work is to adapt the computer mathematical model of the process of continuous grade rolling developed in the Department of Pressure Metal Processing (VOMT) of the Institute of Chemical Engineering of the National Academy of Sciences of the Russian Academy of Sciences for the study and prediction of the mechanical properties of corrosion-resistant and fire-resistant reinforcing bars. Recently, stainless steel grades have been used as a material for such production of rebar. Such rental is usually used in the construction of responsible structures for special purposes of similar objects. Unfortunately, reinforcing bars from stainless steel grades are not produced in Ukraine. Therefore, it is relevant to determine the parameters of the technology of hot grade rolling and subsequent heat treatment from rolling heating in the production of corrosion-resistant and fire-resistant reinforced rolled steel from stainless steel grades. Analytical studies were carried out with the help of a mathematical model for predicting mechanical properties developed at the Institute of Chemical Engineering of the National Academy of Sciences of Ukraine, adapted to the conditions of fine-grade state 250-1 of ArcelorMittal Kryvyi Rih PJSC. It has been established that in the production of thermally strengthened reinforcing bars of a periodic profile with a diameter of 12 mm (rolling start temperature 1150 °С and rolling speed 12.5 m/s), the current technology does not allow to obtain a finished rolled product above class A500 according to the norms of DSTU 3760:2019. This is due to high values of the temperature at the end of rolling Tk.pr.=1095-1109 °С. All investigated stainless steel grades have calculated values of the temperature at the end of rolling by 22-32 °C higher than for low-alloy steel grades. The analysis of research results showed that with a decrease in the initial rolling temperature and subsequent thermal strengthening of rebar No. 12 made of stainless steel grades, for example, according to the strengthening mode for class A600, it is possible to obtain a ready-made corrosion- and fire-resistant rebar with a conditional yield strength above 600 N/mm2. At the same time, the calculated values of plastic characteristics are on average 2 times higher than the normalized values of these properties of DSTU 3760:2019.
Key words: rebar, corrosion resistance, stainless steel, hot graded rolling, mathematical modeling, temperature, mechanical properties.
DOI: https://doi.org/10.52150/2522-9117-2022-36-265-284
For citation: Razdobreev V. G., Palamar D. G., Kluychnikov K. Yu., Leshchenko O. I. Doslidzhennia tekhnolohichnykh parametriv hariachoi sortovoi prokatky pry vyrobnytstvi koroziinostiikoho i vohnestiikoho armaturnoho prokatu [Research of technological parameters of hot variety rolling in the production of corrosion-resistant and fire-resistant reinforcement rolling]. Fundamental and applied problems of ferrous metallurgy. 2022. Collection 36. P. 265-284. [In Ukrainian]. https://doi.org/10.52150/2522-9117-2022-36-265-284
References
1. Odesskiy, P. D. (2018). Sovremennyye stali dlya stroitel’nykh metallicheskikh konstruktsiy i voprosy ekonomicheskoy effektivnosti [Modern steels for building metal structures and issues of economic efficiency]. Stal‘ [Steel], (12), 57-61
2. Konovalov, O. F., Ryzhenkov, O. A., & Korolʹov, V. P. (2004). Systemnyy pidkhid do monitorynhu koroziyi ta zakhystu metalevykh konstruktsiy [System approach to corrosion monitoring and protection of metal structures]. Fizyko-khimichna mekhanika materialiv [Physico-chemical mechanics of materials], (5), 99-103
3. Scully, J. C. (1975). The Fundamentals of Corrosion. Pergamon Press
4. Razdobryeyev, V. G., & Palamar, D. G. (2020). Suchasni tendentsiyi vyrobnytstva koroziynostiykoho i vohnestiykoho nenapruzhenoho armaturnoho prokatu [Modern trends in the production of corrosion-resistant and fire-resistant unstressed reinforcement]. Fundamentalʹni i prykladni problemy chornoyi metalurhiyi [Fundamental and applied problems of ferrous metallurgy], 34, 190-201. https://doi.org/10.52150/2522-9117-2020-34-170-189
5. Razdobryeyev, V. G., Palamar, D. G., Leshchenko, O. I., & Klyuchnikov, K. Yu. (2021). Suchasni tendentsiyi vyrobnytstva koroziynostiykoho i vohnestiykoho napruzhenoho armaturnoho prokatu [Modern trends in the production of corrosion-resistant and fire-resistant tensile reinforcement]. Fundamentalʹni i prykladni problemy chornoyi metalurhiyi [Fundamental and applied problems of ferrous metallurgy], 35, P. 108-133. https://doi.org/10.52150/2522-9117-2021-35-108-133
6. Zhuchkov, S. M., Kulakov, L. V., & Lokhmatov, A. P. (2008). Upravleniye temperaturnym rezhimom nepreryvnoy sortovoy prokatki [Temperature control of continuous section rolling]. In Teoreticheskiye i tekhnologicheskiye osnovy [Theoretical and technological foundations]. Teplotekhnik
7. Zhuchkov, S. M., Palamar’, D. G., Razdobreyev, V. G., & Ivanov, A. P. (2010). Razrabotka informatsionno-analiticheskoy sistemy nepreryvnoy sortovoy prokatki [Development of an information-analytical system for continuous section rolling]. Obrabotka materialov davlenim [Processing of materials pressure], 3(24), 54-59
8. Razdobreyev, V. G., Tokmakov, P. V., Lutsenko, V. A., Sotnikov, A. A., Bobkov, P. A., & Titov, M. I. (2011). Energosberegayushchiye meropriyatiya pri proizvodstve armaturnogo prokata na stane 320 Belorusskogo metallurgicheskogo zavoda [Energy-saving measures in the production of rebar at mill 320 of the Belarusian Metallurgical Plant]. Chernyye metally [Stahl und Eisen], (6), 19-24
9. Razdobreyev, V. G., Palamar, D. G., Motsnyy, V. V., Medinskiy, G. A., & Oleynik, Yu. K. (2018). Analiticheskiye i eksperimental’nyye issledovaniya tekhnologii proizvodstva buntovogo armaturnogo prokata klassa A500 v usloviyakh nepreryvnogo sortovogo stana 400/200 PAO “DMK” [Analytical and experimental studies of the technology for the production of class A500 coiled reinforcing bars in the conditions of a continuous section mill 400/200 of PJSC “DMK”]. Spetsialʹna metalurhiya: vchora, sʹohodni, zavtra [Special metallurgy: yesterday, today, tomorrow] (pp. 350-368). KPI im. Ihoria Sikorskoho
10. Razdobryeyev, V. G., Palamar, D. G., Parusov, Ye. V., & Chuyko, I. M. (2019). Formuvannya struktury i i vlastyvostey vysokomitsnoho buntovoho armaturnoho prokatu z vuhletsevykh staley pry riznykh temperaturno-shvydkisnykh ta enerhosylovykh rezhymakh prokatky [Formation of structure and properties of high-strength rebound reinforcing steel from carbon steels at different temperature-speed and power rolling modes]. Spetsialʹna metalurhiya: vchora, sʹohodni, zavtra [Special metallurgy: yesterday, today, tomorrow] (pp.49-59). KPI im. Ihoria Sikorskoho
11. Parusov, E. V., Parusov, O. V., Razdobreyev, V. G., Chuyko, I. N., & Dolgiy, S. V. (2019). Raschet i modelirovaniye parametrov rezhima deformatsionno-termicheskoy obrabotki pri proizvodstve buntovogo prokata periodicheskogo profilya iz vysokouglerodistoy stali [Calculation and modeling of the parameters of the mode of deformation-heat treatment in the production of coiled rolled products of a periodic profile from high-carbon steel]. Deformatsiya i razrusheniye materialov i nanomaterialov [Deformation and destruction of materials and nanomaterials] (pp. 129-131). IMET RAN
12. Dzugutov, M. Ya. (1977). Plasticheskaya deformatsiya vysokolegirovannykh staley i splavov [Plastic deformation of high-alloy steels and alloys]. Metallurgiya
13. Cuitie, N., & Foley, I. (1998). Charter Steel Modernization: Prefinishing mill and high – speed rod. Iron and Steel Eng., 75(1), 37-38
14. Bulat, S. I., Tikhonov, A. S., & Dubrovin, A. K. (1975). Deformiruyemost’ strukturnoneodnorodnykh staley i splavov [Deformability of structurally inhomogeneous steels and alloys]. Metallurgiya
15. Khimushin, F. F. (1968). Zharoprochnyye stali i splavy [Heat-resistant steels and alloys]. Metallurgiya, 1968
16. Budenbender, G. (1977). Temperaturverlant beim Walzen kleiner Querschiitte anf einer kontinueirlichen Drahtstrabe. Kalibreur, (27), 31-78
17. Bourgin, C., Chauveau, E., & Dermelin, B. (2006). Stainless steel rebar: the choice of service life. La Revue de Metallurgie. CIT, (2), 89-98
18. Pickering F. B. (1982). Physical Metallurgy and the design of steels: Materials science series. Metallurgy
19. BSSA Conference Report. Steel Times. (1996). Stainless Steel in construction industry, (1), 21-23
20. Cochrane, D. Y. (1996). Austenitic stainless steel – The solution to rebar corrosion. Steel Times, (1), 19-20
21. Bernshteyn, M. L., & Rakhshtad, A. G. (1983). Metallovedeniye i termicheskaya obrabotka stali. T. III. Termicheskaya obrabotka metalloproduktsii [Metal science and heat treatment of steel. T. III. Heat treatment of metal products]. Metallurgiya
22. Pauly, T. (1996). Nichtrostender Draht-ein Produkt mit Alltagsbedeutung und Innovationspotential. Stahlmarket, (4), 36-41
23. Pogorzhel’skiy, V. I., Litvinenko, D. A., Matrosov, Yu. I., & Ivanitskiy, A. V. (1979). Kontroliruyemaya prokatka [Controlled rolling]. Metallurgiya
